Condor Air Compressor Parts of 2026 For Reliable Shop Air
Upgrade worn pressure switches with reliable condor air compressor parts this October 2026 to prevent motor burnout and stop hissing air leaks.
By Kenny Koehler
Updated October 7, 2026
Unloader valves that continuously hiss after tank shutdown or electric motors stalling under peak head pressure usually point straight to a failing switch. Worn contacts inside standard control boxes weld shut or lose spring tension over repeated duty cycles, causing dangerous tank over-pressurization or blown circuit breakers. Upgrading your workshop setup with dependable condor air compressor parts restores crisp cut-in and cut-out cycling while venting trapped air between strokes. A heavy-duty switch manifold ensures your stationary compressor or mobile jobsite rig runs without unexpected motor strain.
Evaluating replacement pressure switches requires looking at practical engineering details like cut-in and cut-out PSI thresholds, 1/4-inch NPT 4-port manifolds, and compression unloader valves. Getting the right component prevents irritating air leaks around auxiliary ports and protects your motor capacitors from starting against high backpressure. Based on manufacturer specifications and common workshop setups, installing precise factory-matched components makes air delivery safe and trouble-free. Swapping in rugged controls keeps your pneumatic tools running with steady tank pressure day after day.
| Award | Product | ACR Score About ACR ScoreThe ACR Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more › | |
|---|---|---|---|
| Best Premium |
11LC2E 4-Port Air Compressor Pressure Switch
|
8.9/10 | Buy |
LifeImpree 034-0184 Air Compressor Pressure Switch
|
7.8/10 | Buy | |
E107200 Air Compressor Pressure Switch Replacement
|
8.1/10 | Buy | |
| Best Overall |
Condor 11QC2EART Air Compressor Pressure Switch
|
9.1/10 | Buy |
| Best Budget |
Condor 034-0199 Air Compressor Pressure Switch
|
8.0/10 | Buy |
GBOKYN 034-0228 Air Compressor Pressure Switch
|
7.8/10 | Buy | |
Condor USA 15WTZXADL 160-200 PSI Air Compressor
|
7.8/10 | Buy | |
| Best Value |
Condor 120-155 PSI Air Compressor Pressure Switch
|
8.4/10 | Buy |
11LC2E 4-Port Air Compressor Pressure Switch
This heavy-duty 11LC2E replacement pressure switch features a factory-set 120-150 PSI range, 26-amp contact capacity at 240V, and a 4-port 1/4-inch FNPT manifold with an integrated compression unloader. It is an ideal direct-fit solution for garage DIYers, automotive mechanics, and shop owners repairing single-phase stationary compressors.
Pros
- Robust 26-amp electrical contact rating supports 120V (up to 2HP) and 240V (up to 3HP) motors without external magnetic starters
- Four 1/4-inch FNPT bottom ports provide convenient hookup points for gauges, relief valves, and direct air drops
- Pre-set to common shop working pressures (120-150 PSI) while retaining mechanical range and differential adjustability
- Includes a pre-installed 90-degree 1/4-inch compression unloader fitting to simplify tube alignment
Cons
- Single-phase 2-pole layout cannot directly switch three-phase commercial compressor motors without a secondary magnetic starter
- Requires manual sealing with PTFE tape or paste on all tapered 1/4-inch NPT ports to prevent slow micro-leaks
- Clearance around the 90-degree unloader elbow can be tight on compact compressor tank brackets
LifeImpree 034-0184 Air Compressor Pressure Switch
The LifeImpree 034-0184 pressure switch is a direct replacement control assembly featuring factory 125-155 PSI settings, a 4-port 1/4-inch NPT manifold, and a 90-degree quick-connect unloader. It is an ideal drop-in repair for garage DIYers, shop owners, and equipment technicians restoring dependable tank pressure cycling.
Pros
- Pre-calibrated 125 cut-in and 155 cut-out PSI settings save calibration time during installation
- Versatile 4-port 1/4-inch NPT manifold layout accommodates gauges, relief valves, and tank plumbing
- Includes an integrated 90-degree 1/4-inch quick-connect unloader valve for motor restart relief
- Built-in Auto/Off switch allows rapid manual shutdown without unplugging the compressor unit
Cons
- Fixed 125-155 PSI factory calibration is not suitable for single-stage compressors rated for 100-125 PSI maximum pressure
- Requires matching 1/4-inch OD unloader tubing; copper compression-style unloader lines will require an adapter
- Electrical motor horsepower and amp limits should be verified against your compressor motor before wiring
E107200 Air Compressor Pressure Switch Replacement
This E107200 replacement pressure switch provides a factory preset 125-155 PSI operating range, a versatile 4-port 1/4-inch NPT manifold, and a 90-degree quick-connect unloader valve. It serves as an accessible replacement for DIYers and mechanics repairing compatible DeWalt and Husky workshop compressors.
Pros
- Factory calibrated to 125 cut-in and 155 cut-out PSI for direct replacement without immediate adjustment
- Versatile 4-port 1/4-inch NPT manifold simplifies connecting safety valves, tank lines, and gauges
- Includes a pre-installed 90-degree 1/4-inch unloader fitting with oil boot to vent pump head pressure
- Straightforward Auto/Off toggle lever delivers positive mechanical motor control
Cons
- Factory pressure differential is preset and may require manual fine-tuning for non-standard air setups
- Thread sealant or PTFE tape must be supplied separately to seal all 1/4-inch NPT connections
- Generic replacement packaging generally lacks dedicated wiring schematics or installation manuals
Condor 11QC2EART Air Compressor Pressure Switch
The Condor 11QC2EART is a dedicated 135-175 PSI pressure switch engineered as a direct replacement for Quincy part number 2023738400. Featuring a 4-port 1/4-inch NPT manifold and an integrated unloader valve, it is an essential replacement component for mechanics and maintenance personnel managing two-stage shop compressors.
Pros
- Direct replacement compatibility for Quincy 2023738400 air compressors
- Standard 4-port 1/4-inch NPT manifold allows clean mounting for tank lines, safety valves, and gauges
- Includes EV1WBi 1/4-inch unloader valve to prevent compressor motor startup stall
- Clear Auto/Off manual disconnect lever simplifies routine maintenance and safety shutoff
Cons
- Factory preset range of 135-175 PSI is too high for standard 90-125 PSI single-stage homeowner compressors
- Requires careful electrical wiring and proper pipe thread sealant application during installation
- Unloader line connection must match the 1/4-inch EV1WBi fitting profile on the existing compressor
Condor 034-0199 Air Compressor Pressure Switch
The Condor 034-0199 pressure switch is a direct replacement unit pre-set for 145-175 PSI operation, featuring a versatile 4-port 1/4-inch NPT manifold and a 90-degree 1/4-inch quick-connect unloader valve. It provides a reliable control solution for workshop owners and mechanics needing to restore automatic cycling to their high-pressure air compressors.
Pros
- Direct drop-in replacement for part number 034-0199 (Condor 12RC2FAEQ)
- 4-port 1/4-inch NPT manifold provides flexibility for mounting gauges, safety valves, and airline taps
- Factory set for 145-175 PSI, suitable for higher pressure air compressor tanks
- Features a 90-degree 1/4-inch quick-connect unloader valve to relieve pump head pressure during cycles
Cons
- Fixed 145-175 PSI factory range is not intended for lower-pressure 90-125 PSI single-stage compressors without adjustment
- Requires proper thread sealant on all 1/4-inch NPT ports during installation to prevent air leaks around the manifold
- Unloader uses a 1/4-inch quick-connect port, which may require an adapter if your existing unloader line uses a compression fitting
GBOKYN 034-0228 Air Compressor Pressure Switch
This GBOKYN pressure switch serves as a direct replacement for part 034-0228, offering a pre-set 120-150 PSI operating range and a 4-port 1/4-inch NPT manifold. Featuring an integrated Auto/Off lever and a 90-degree 1/4-inch quick-connect unloader, it helps garage DIYers and equipment technicians restore reliable automatic pump cycling.
Pros
- Direct replacement match for equipment requiring part number 034-0228 or Condor 12LC2FAKX
- 4-port 1/4-inch NPT manifold simplifies simultaneous mounting of gauges, relief valves, and tank connections
- Pre-set 120-150 PSI cycling range matches standard medium-pressure workshop compressed air requirements
- Includes a 90-degree 1/4-inch quick-connect unloader valve fitting for straightforward unloader line routing
Cons
- Fixed 120-150 PSI factory setting is not intended for high-pressure two-stage 175 PSI systems
- Requires manual application of thread sealant or PTFE tape across all 1/4-inch NPT ports to prevent air leaks
- The 90-degree unloader port is configured specifically for 1/4-inch quick-connect unloader lines rather than threaded compression nuts
Condor USA 15WTZXADL 160-200 PSI Air Compressor
Designed as a direct replacement for part A21107 on DeWalt, Craftsman, and DeVilbiss compressors, this switch operates within a factory 160-200 PSI range. Featuring a 1/4-inch 4-port NPT manifold and an unloader-free configuration, it provides a dependable swap for high-pressure garage and shop air systems.
Pros
- Direct OEM replacement for Craftsman, DeWalt, Black and Decker, and DeVilbiss part number A21107
- Factory-configured 160-200 PSI range matches high-pressure compressor operating requirements
- Four 1/4-inch NPT ports allow straightforward mounting of a tank inlet, gauge, and safety pop-off valve
- Compact 0.7-pound housing fits inside tight factory compressor shrouds
Cons
- Does not include an unloader valve, making it unsuitable for setups requiring a switch-mounted bleeder line
- High 160-200 PSI range cannot be used on lower-pressure 125-150 PSI single-stage compressors
- Requires separate 1/4-inch NPT plugs and thread sealant for unused manifold ports
Condor 120-155 PSI Air Compressor Pressure Switch
The Condor 13AC2FAKY pressure switch serves as a direct replacement for Campbell Hausfeld CW218800AV units, providing factory-set 120-155 PSI automatic cycling, a 4-port 1/4-inch NPT manifold, and a 90-degree 1/4-inch quick-connect unloader. It is an ideal fix for garage DIYers and mechanics needing to restore automatic cycling to their shop compressors.
Pros
- Direct replacement fit for Campbell Hausfeld CW218800AV setups
- Factory-set 120-155 PSI pressure band matches common workshop tank requirements
- 4-port 1/4-inch NPT manifold provides dedicated ports for gauges and safety valves
- 90-degree 1/4-inch quick-connect unloader fitting simplifies air line attachment
Cons
- Preset 120-155 PSI cycling range cannot be adapted for low-pressure single-stage systems needing a sub-100 PSI cut-out
- Unloader port is configured specifically for 1/4-inch quick-connect line and may require an adapter if replacing compression fitting lines
- Thread sealant is not included, requiring users to supply their own PTFE tape or anaerobic paste for airtight NPT sealing
Frequently Asked Questions
How do I know if my compressor pressure switch needs replacement?
A switch needs replacement if the motor fails to stop at the target cut-out pressure or hisses continuously from the unloader valve. When mechanical switch contacts pit or fuse, the compressor will either blow the safety relief valve or refuse to start at all. Continuous hissing through the unloader after shutdown indicates either a bad internal unloader valve or a leaking tank check valve. Replacing worn condor air compressor parts restores automatic cycling and prevents motor windings from overheating.
What is the purpose of a 4-port manifold on a pressure switch?
A 4-port manifold provides connection ports for your pressure gauge, safety relief valve, unloader line, and auxiliary tank feed. Having four dedicated 1/4-inch female NPT ports allows complete accessory integration on one compact casting. This layout saves space on top of the air tank and eliminates the need for extra pipe tees. You can easily plug any unused ports with standard brass hex plugs if your compressor configuration requires fewer hookups.
Can cut-in and cut-out pressure ranges be adjusted on these switches?
Yes, most mechanical switches offer adjustable differential screws inside the cover housing. The main central spring screw typically changes both cut-in and cut-out pressures simultaneously, while the secondary screw modifies the differential range. However, exceeding the factory maximum PSI rating can overload the motor or exceed the pressure vessel safety limits. It is best to maintain the factory ratings of 120-150 PSI or 135-175 PSI to ensure consistent tool CFM and tank longevity in 2026.
Why does the compressor motor hum and trip the breaker at startup?
A failed unloader valve on the pressure switch usually causes the motor to stall against trapped head pressure. The unloader is designed to bleed off residual head pressure the moment the compressor shuts off, allowing the pump to spin freely during the next start. If the switch fails to trigger this vent cycle, the electric motor must overcome full tank backpressure, drawing excessive starting amperage and tripping your shop breaker. Installing fresh condor air compressor parts ensures proper head depressurization on every stop.
What is the difference between standard quick-connect and compression unloader fittings?
Quick-connect fittings allow push-to-connect plastic tubing installation, whereas compression fittings require a brass ferrule and nut on copper or nylon line. Modern replacement switches often feature a 90-degree 1/4-inch quick-connect elbow for fast, leak-free tubing attachment. Compression connections offer maximum heat resistance for unloader lines routed close to hot cylinder heads. Matching your existing discharge tubing style ensures an airtight seal without kinking or heat degradation.
About the author
Kenny Koehler is a power-tool specialist with more than a decade of hands-on evaluation experience and a science-based approach to product testing. His expertise in repeatable testing, tool performance, impact wrenches, and professional equipment brings a practical, data-focused perspective to compressor and pneumatic-tool comparisons.